Well Pump Repair & Installation in Boise, ID

well pump

Well Pump Repair & Installation in Boise, ID, and Surrounding Areas

When your well pump fails, your entire water supply goes with it. Low water pressure, air spurting from faucets, or no water at all are signs that your well pump needs immediate attention. Beacon Plumbing provides expert well pump repair and installation in Boise, ID, and surrounding areas — getting your water flowing again quickly and reliably.

Call us today at 208-516-2061 and let’s get your well pump back on track.

No Water? No Problem — Why Boise Calls Beacon Plumbing First

A well pump failure can’t wait, and neither do we. Here’s what Boise homeowners can expect when they call Beacon Plumbing:

  • 100% satisfaction guaranteed on every job
  • Licensed plumbers experienced with all major well pump brands and types
  • Fast response times including same-day and emergency service
  • Thorough diagnostic assessment before any repair or replacement recommendation
  • Upfront pricing with no hidden fees

From Diagnosis to Done — Our Well Pump Repair & Installation Process

Well pumps are the heart of any private water supply system, and when they start to fail the signs aren’t always obvious right away. Gradual pressure loss, cycling on and off too frequently, unusual noises, or a sudden spike in your electricity bill can all point to a pump that’s struggling. Catching these issues early can mean the difference between a straightforward repair and a full replacement.

Beacon Plumbing technicians are experienced with submersible pumps, jet pumps, and everything in between. Whether your existing pump needs a targeted repair or has reached the end of its service life, we’ll give you an honest assessment and a clear recommendation. When a new installation is the right call, we source quality equipment and handle the full installation up to code and built to last.

If your well system needs additional attention, ask us about our well water treatment systems, pressure tank repair and installation, and water filtration systems as well.

Ready to Restore Your Water Supply?

Don’t go another day without reliable water — Beacon Plumbing delivers fast, professional well pump repair and installation in Boise that gets your system back up and running.

Call 208-516-2061 today and let’s get your water flowing again.

Most Recent Pins (20)

Ken Alverson
Beacon Home Services replaced fill valve cartridges and cleared sediment from water lines after a pump replacement in Boise, ID. They ensure water systems function properly by removing debris and installing new parts to maintain flow and prevent damage.
Check-in Location
Water filter system with ball valves and pressure gauge
Water filter system with ball valves and pressure gaugeBathroom faucet with water running into sink basinToilet fill valve with sediment buildup inside tankWater line sediment buildup inside floor drain bowlToilet bowl with sediment discoloration and fill valve line
Ken Alverson
Beacon Home Services in Boise, ID repairs well pumps that have failed. They provide efficient solutions to restore water flow without pressure issues. Their service ensures the well pump operates correctly for reliable water supply.
Check-in Location
Well pump pressure switch with control box on pavement
Well pump pressure switch with control box on pavementWell pressure tank with gauge and plumbing connections
Jesse Hill
Beacon Home Services troubleshot and identified an undersized pump circuitry in Boise, ID. They assessed the electrical load and provided an estimate to install appropriate power wiring for the customer's shop, ensuring the pump system operates safely and efficiently.
Check-in Location
Pump circuitry electrical panel with wiring in Boise
Pump circuitry electrical panel with wiring in BoisePump control box wiring and circuitry connections inside panelPump electrical circuitry conduit and wiring in cornerPump circuit wiring troubleshooting in metal junction boxPump circuitry troubleshooting in residential yard Boise ID
Chris Hall
Beacon Home Services replaced a leaking well pressure tank in Meridian, ID. After diagnosing the tank failure, they installed a new pressure tank and verified leak-free operation to ensure reliable water pressure.
Check-in Location
Well pressure tank with new installation in basement
Well pressure tank with new installation in basementWell pressure tank with new valve and pipingWell pressure tank with hand-written inspection notes
Patrick Cahill
In Mountain Home, ID, Beacon Home Services replaced a malfunctioning pressure switch in the well pump house. They identified a bare wire causing switch failure and discovered a faulty emergency breaker. The breaker requires replacement by a licensed electrician to restore power flow to the unit.
Check-in Location
Pressure switch on well pump pressure tank system
Pressure switch on well pump pressure tank systemPressure switch wiring in well pump control panelPressure switch on well pump piping with gauge
Chris Hall
Beacon Home Services installed customer-provided well pressure tanks in a crawl space in Boise, ID. They handle well tank placement and setup to ensure proper water pressure and system performance in residential properties.
Check-in Location
Well pressure tanks installation in crawl space
Well pressure tanks installation in crawl spaceWell pressure tanks installation in crawl space
Chris Hall
Beacon Home Services in Boise, ID diagnosed and recharged an empty well pressure tank causing irrigation surging. They assessed corrosion on the tank and piping and provided replacement quotes to ensure reliable water pressure.
Check-in Location
Pressure tank digital pressure gauge at 21 PSI
Pressure tank digital pressure gauge at 21 PSIPressure tank and irrigation piping in crawlspace
Chris Hall
Beacon Home Services repaired well piping to the VFD manifold in McCall, ID. They ensured the piping system functions correctly with the variable frequency drive, improving water flow control and system efficiency in the well setup.
Check-in Location
Water softener system with pressure tank and piping in basement
Water softener system with pressure tank and piping in basementWellXtrol pressure tank with gauge and piping manifold
Patrick Cahill
Beacon Home Services in Emmett, ID provides full re-piping for two bathrooms, including new shut-off valves and supply lines. They install a new 50-gallon gas water heater and replace failing well pumps. They keep cut openings minimal for easier patching by others after work completion.
Check-in Location
Potable water re-pipe with new shutoff valve in wall cavity
Potable water re-pipe with new shutoff valve in wall cavityPotable water re-pipe with PEX piping in ceiling cavityBathroom water supply piping with shut off valves installedElectrical panel with conduit in basement cornerPotable water repiping with ceiling access hole cut
Brady Larson
Beacon Home Services in Nampa, ID repaired a leak in a well house by replacing a rusted water softener and removing broken galvanized waterlines. They installed a new softener and replaced the old lines with brass piping to restore the water system.
Check-in Location
Water softener replacement with brass waterlines
Water softener replacement with brass waterlinesWater softener system with control panel and pressure tank
Chris Hall
Beacon Home Services in Caldwell, ID, replaces 30-gallon pressure tanks by draining the system and removing the old tank. They install a new pressure tank, add a tank tee and pressure relief valve, re-plumb the system to the well, set the tank pre-charge, and test system function.
Check-in Location
Pressure tank installation with new tank tee and valve
Pressure tank installation with new tank tee and valvePressure tank with new tank tee and relief valve installationPressure tank plumbing and wiring in basement wall cavityPressure tank with gauges and pressure relief valve installationPressure tank label showing specs and safety warnings
Alex Boudreaux
In Caldwell, ID, Beacon Home Services repaired a water pump that failed to produce water. The technician checked the pressure switch and water pump, identified a full pressure tank and primed pump, and concluded the well underneath is dry, affecting the water system pressure.
Check-in Location
Water pressure tank and pump system with diagnostic tools
John Manolakis
Beacon Home Services in Caldwell, ID inspected a well tank with high pressure causing the relief valve to open. They replaced the transducer for the Franklin pump controller and installed a new relief valve. They tested the system to ensure proper function and completed the repairs.
Check-in Location
Well pressure relief valve and pump controller replacement
Well pressure relief valve and pump controller replacementFranklin SubDrive Connect pump controller installationWell pressure relief valve and transducer installationFranklin pump controller and well pressure relief valveWell pressure relief valve with pressure gauge and piping
Chris Hall
Beacon Plumbing Replaced and Updated piping in home Installed a new Well Pump and Water heater.
Check-in Location
PEX water piping with new fittings in ceiling cavity
PEX water piping with new fittings in ceiling cavityWater heater supply lines with shutoff valves under sinkWell pump piping installed behind wall framingWashing machine water supply valves and hoses installationPiping system with valves and fittings in home ceiling
Chris Hall
Beacon Home Services provided a detailed plumbing quote for a home remodel in Boise, ID. The project included adding fixtures for a full bathroom, redesigning the kitchen plumbing, relocating fixtures, and installing a whole-home water softener and disinfection system.
Check-in Location
Brady Larson
Beacon Home Services in Meridian, ID inspected a home with no water supply. They found the well’s breaker was disconnected and restored it, returning water service to the residence efficiently.
Check-in Location
Well breaker panel with wiring inside open box
Chris Hall
Beacon Home Services in Emmett, ID inspected and repaired a well water system with a failed pump impeller. They replaced the faulty pump with a 1 HP jet pump, upgraded the water heater to a 50-gallon gas unit, and completed a full home re-pipe of the potable water system.
Check-in Location
Josh Jeffery
Beacon Home Services completed a ball valve relocation from a crawl space to a garage in Eagle, ID. They provided an estimate and handled the valve transfer efficiently to improve access and maintenance convenience.
Check-in Location
Josh Jeffery
Beacon Home Services inspected a leaking gate valve in a Garden City, ID crawl space. They assessed original galvanized water lines and provided estimates to replace the valve and the home's entire water line system.
Check-in Location
Patrick Cahill
Beacon Home Services replaced a 15-amp fuse and a capacitor for a well system in Nampa, Idaho. They ensure the well system operates efficiently by servicing electrical components to maintain water flow and system reliability.
Check-in Location
Well system metal enclosure exterior in backyard
Well system metal enclosure exterior in backyardWell system fuse and capacitor replacement outdoorsWell system fuse and capacitor replacement panel
Check-ins - Reviews - Content - Ranking
Maps data from OpenStreetMap © OpenStreetMap